Material handling equipment
Material handling equipment Material handling equipment

Material handling equipment




Transshipment points

Due to the capacity of the HORMANN are able to offer equipment tovaroraztovarnite sites from one manufacturer with a single management system.



Platform leveling


Material handling equipment

Mobile loading platform is self-supporting steel frame construction (some type) with walls and standard dynamic payload 60 kN - 6 tons. It has an electro-hydraulic two - cylinder system with two valves with a maximum (12.5% ​​ascending / descending) slope, even withstand uneven loading. Automatic valves for emergency lockout fixed ramp with the load in premature departure of the truck. Loading / discharging ramps with exit (500.1000 mm) platform - HTL - 2 have the opportunity for accurate positioning even when the car is loaded close to the rear edge. The ramp is a non-slip steel with thickness of 6 / 8 mm reinforced profiles 100/100/10 below attached hinged in three places with a diameter of 30 mm hinge. Platform is coming out with a thickness of 12.14 mm and the standard front seal of the ramp is a PE of 3 mm thick and is black in color. Management platform is a system "Totmann" - 400/24 ​​C, 16A with automatic restraint operator - emergency stop switch and lock release. Control unit is equipped with a button "Auto" at the touch of a ramp is automatically reset. Management system is prepared for the switch which prevents lifting of the ramp at full sectional door unopened, and management in.
Loading / discharging ramps conforming to the current standards: EN 1398, Directives 98/37 EG, 89/106 EEG and ZH 1 / 156 of the European Union and marked with safety SЄ.


Gaskets (canning) of ramps


Material handling equipment

Seals of the transfer sites are several types of "curtain", "bags and inflatable seals".
DSL is the seal of the double layer of reinforced, elastic fabric, polyester monofilaments with a thickness of 3 mm with double PVC coated, high durability and strength - 7700 N / 5 cm It consists of a triangular front and rear frame of Hot steel profiles. The seal is a flexible structure, and attachment of tissue is via aluminum profiles. At the top of canning provided vodootichane. The upper lane of canning with increased protection from wind. Gaskets are black (RAL 9011) color with white bands signal - RAL 9016.


Loading ramp with hinged lip or telescopic lip


Material handling equipment

Loading ramps, Hörmann are well thought out solutions for precise alignment of the difference in level between different high trucks and cargo platforms. Thus the load can be derived from the truck or imported into it with one single movement in a horizontal direction.